Brace yourself for the unending choice in hues, colours, cuts and shapes in fancy diamonds. It may be true that more and more people are now aware of how to buy colourless diamonds, the 4 Cs of diamond quality, where to procure loose diamonds for a particular setting etc., but still there is a large population of buyers who want something unique but feel hesitant about venturing into the world of fancy coloured diamonds. If you find yourself relating to the latter description, read on to get some clarity about buying fancy diamonds.

Another decision that could be taken early on is the kind of jewellery you wish to set the diamond in. For instance, if you want to buy a diamond to be set in a ring design, it may be wise to look for a carat size of 1 to 4, as anything bigger would look too bulky on a delicate finger. On the other hand, if you want a fancy coloured solitaire diamond pendant, you could consider buying a bigger size. Also, if you have an elaborate design in mind, it is advisable to consider the carats and cuts of the diamonds accordingly whereas if the design is simple you can go for an unusual cut and shape of the diamond to make the piece truly one of a kind.

Fancy diamonds are available in a wide range of colours like brown, pink, red, yellow, blue, green, purple, orange, etc and a variety of shapes as well. It is vital not to compromise on the clarity and cut grade of coloured diamonds as they bring out the best colour intensity of such stones.

The largest diameter of the diamond as you look down on it further is called the girdle. This top part of the diamond from the girdle up to the table is called the crown and of course the crown height and crown angle refer to the depth of this part of the diamond and the angle from the girdle up to the table. The part of the diamond that you don’t see when you look down at a diamond ring is called the pavilion, the part from the girdle down to the bottom of the diamond. The bottom of a modern diamond is generally pointed. The distance down from the girdle to this point is called the pavilion depth. The angle from the girdle edge to this point is the pavilion angle.

The polish of a diamond is pretty much self-explanatory. It is a lot like when you polish your car. Sometimes there are marks left and sometimes the car wash does a better job than other times. In a similar fashion, the diamond finish is graded by the diamond industry. Good, very good, excellent and ideal for example are grade designations for polished diamonds.

The symmetry of a diamond refers to the shape, size and proportions of the facets cut into the crown. Are the facets all of consistent shape around the crown of the diamond? Do the points of one facet align perfectly with the next facet? Are the lines of the cuts straight or wavy? Are the facets perfectly flat? These are questions used to define the symmetry of a modern cut diamond.

Modern jewelry comes in many shapes and types. Diamond necklace simply make a woman shine among a gathering. Sparkling earrings simply make others swoon (either in jealousy or appreciation). Brooches, rings and bracelets are the other commonly used diamond jewelry pieces. Buying diamond jewelry has become easy and reliable with the advent of some committed sellers. You can rest assured that the diamond you are about to buy is genuine and not fake. Look for vendors who promise to give the money back on return of the diamond within a period of thirty days, if you are not satisfied with the product.

A diamond’s clarity is established through its inclusions and blemishes. The inclusions are internal irregularities while the blemishes are considered to be the surface flaws. Although diamonds are made out of pure carbon, sometimes, during the process, various minerals tend to mix, producing the inclusions and blemishes. The clarity of a diamond is determined through a 10x magnification by a certified diamond grader. The higher the clarity the more expensive a diamond ring will be. People tend to misconstrue carat as the diamond’s price value but the truth is a diamond’s carat signifies the gem’s measure of weight. Since large diamonds are rare compared to their smaller counterparts, the price of diamond rings which boast a higher carat also tend to become more expensive.

The perfect diamond rings are considered to be colorless. Although there are diamonds that have a hint of color in them, their prices tend to drop. Diamonds with a yellow tinge are cheaper and are given the lowest grade while diamonds that are colorless are given the highest marks. Perhaps the most essential yet the most difficult part to achieve is the perfect cut. How a diamond is cut can significantly affect its brilliance and its price value in the market. Poorly cut gems have the lowest grades while diamonds that are perfectly cut are given the highest marks by diamond grades. Typically, diamonds rings that showcase a perfectly cut diamond are also more expensive.

Obviously if you’re not getting the real thing, the cost is going to be lower. This has great benefits to the pocket book, especially as the cost difference is rather significant. For simulated diamonds, you only pay a fraction of the cost that you would for genuine diamonds. As far as not getting the “real thing”, keep reading to discover why this ought not to be a concern. Choosing the right simulated diamond is important, but if you do your research, you will be surprised to find that certain simulants have more dazzle and shine than a genuine diamond!

There are some drawbacks to simulated diamonds that you should be aware of. Certain simulated diamonds have a chemical makeup that produces a soft stone, meaning they can easily be scratched and damaged. However, here’s the bright spot. Cubic zirconia doesn’t have this issue. While diamonds are a ten on the hardness scale, cubic zirconias are a close runner-up, measuring 8-8.5. With only a few exceptions, cubic zirconia is the hardest gemstone out there, making it a valuable stone that you need not be concerned over damaging.

Certain precious and semi precious stones are very rare, as you would notice from availability and the accompanying pricetag when you are actually able to find them. With the increasing popularity of simulated diamonds, more and more gemstones are being created that would otherwise be very difficult to obtain, such as coloured diamonds. Only 10-15% of genuine diamonds have the perfect cutting angles, due to having defects and flaws that demand an adjustment of the cutting position. Simulated diamonds do not have this dilemma however, and since they do not have the flaws they can be cut proportionally, giving a brighter, more glistening finish.

These designer rings have become trendsetters and are all the rage now. They make it easier for you to make your decision and settle on the perfect ring. Diamonds are thought to be the definitive sign of timeless love, fidelity and admiration. A designer diamond ring says a lot about the dedication shown by to each other by the couple. On the whole, a designer diamond engagement ring has three components to consider for selection. The first is the band, which is the main part of the ring and fits around your finger. The arrangement of holding the diamond is the next component of these rings. In a few rings, this arrangement might be split, while still other rings might have a solitaire arrangement. By and large, the arrangement depends a lot on the size and shape of the stone. These two factors usually hinge on the budget.

Depending on your finances, you can choose from a wide range of designer diamond engagement rings such as the traditional solitaires, rings set with three stones, diamond side rings, etc. You can also get designer diamond rings in single diamond Tiffany solitaire settings to more complex and bejeweled settings with numerous diamonds accentuating your designer ring. The three diamond arrangement set in platinum or white and yellow gold is also quite popular. You can get corresponding rings for engagement as well as the wedding too. Designer diamond rings can be obtained in tension settings. This setting is an exclusive way of displaying and setting designer diamonds. The best way to put on display the radiance of the diamond is by using the technique of tension mounting. These tension settings can be customized according to your needs.

Part of being a smart consumer is spending some time getting educated. A diamond broker can help provide you this education. Your diamond broker should be a trained gemologist that deals with diamonds on a daily basis. They should be able to educate you in every area of purchasing a diamond. No matter what shape diamond you are interested in, the diamond broker should be able to help you determine the best possible cut so the diamond you decide on exhibits the maximum brilliance and sparkle possible. On the retail side you get the convenience of meeting with an expert in person, however it may be difficult to find an unbiased expert, as they will likely try to persuade you to buy a diamond from their store.

Some people prefer to see loose diamonds in person, helping them to visualize their purchase and ensure they are getting good quality for the price. However, how can you be sure that a retail store can provide you with a superior selection of loose diamonds, competitive prices, and the expertise required to educate you in order to make the best possible purchase? Try to select an online diamond broker who can provide you with the flexibility of seeing your diamond in person before you make the purchase. Be sure they have carefully selected local stores offering the level of service you’d receive at a high priced expensive retail store, with the assurance that you will get the lowest negotiated price.

Additionally, the online diamond broker you select should offer a price guarantee and refund policy. Not only does this allow you to change your mind, it provides you with the confidence you need in these tough economic times to ensure your hard earned dollars are being spent on the perfect loose wholesale diamond for you.

If you can visualize two pyramids joined at the base – an eight-sided polyhedron, or octagon – you know what diamonds look life when they first come out of the ground. The reason for this has to do with the shape of the carbon molecules that make up diamond crystals. When jewelers finally learned how to cut this substance, they simply followed the gem’s natural shape. Princess cut diamonds represent the pinnacle of the diamond cutter’s art.

Princess cut diamonds first appeared almost thirty years ago, and was the innovation of a Los Angeles diamond cutter named Israel Itzkowitz. Prior to this time, the stones used in diamond rings were either “round cut” – with equal cuts around the face of the stone – or “square cut” – meaning that four sides were long and the other four were short, so the face of the diamond approximated a rectangular shape. A Princess cut diamond ring is the result of three years of intense study on the part of Itzkowitz in his attempts to come up with a cut that combined the best features of both the round and the square cuts.

Princess cut diamonds, also called “modified square brilliant,” are the second most popular choice today for diamond engagement rings and other jewelry. Both traditional white and the wide range of colored diamonds account for most of the mounted and loose diamonds sold today. One of the reasons that Princess cut diamond rings are rapidly gaining in popularity is not only because of its brilliance compared to other cuts; it is in fact the most economical way to cut a diamond. Of all diamond cuts, the princess cut wastes the least of the original stone, so it retains substantially more of its original weight. Because of this, these pieces are less costly than similar rings with round cut gems. All around, a princess cut diamond ring represent the best jewelry value on a per-carat basis.